Automobile control system--Ignition switch and anti-versa lock key warning switch
Automobile control system
Ignition switch and anti-versa lock key warning switch
Malfunction phenomenon table
Phenomenon
Ignition switch could not insert on any
position
Inspection
1. Check the ignition switch.
Check the conduction of ignition switch joint and terminal
Position of switch
Terminal connected by avometer
LOCK
ACC
ON
START
If the conduction does not accord with the regulation, change
the switch.
2. Check the anti-versa lock key warning switch.
Position of switch
OFF (key does not insert)
ON (key inserts)
If the conduction does not accord with the regulation, change
the switch.
394
1. Ignition switch
2. Circuit of power supply
-
1-3
1-2-3, 5-6
1-2, 4-5-6
Terminal connected by avometer
-
1-2
Possible malfunction part
Regulated situation
Not conduction
Conduction
Conduction
Conduction
Regulated situation
Not conduction
Conduction
Reference page
394
-