Geely FC Workshop Manual page 161

7. Assemble hydraulic control unit and bracket.
(a) Assemble hydraulic control unit and bracket with screw cap
and two bolts.
Torque: 19 N⋅ ⋅ ⋅ ⋅ ⋅ m
(b) Liking that shown in figure, use special tool to assemble
brake oil pipe on correct position of hydraulic control unit.
Torque: 15 ± ± ± ± ± 2 N⋅ ⋅ ⋅ ⋅ ⋅ m
(c) Connect the joint of hydraulic control unit.
(d) Assemble bolt and connect the joint.
8. Assemble gasket of right front wing.
9. Assemble right front wheel.
10. Add brake liquid in storage tank.
11. Discharge the air in main pump.
12. Discharge the air in brake pipeline.
13. Check the liquid level of brake liquid.
14. Check whether brake liquid leaks.
15. Use handle tester to check the hydraulic control
unit.
150
Brake--Hydraulic pressure control unit
Connect the front
of main cylinder
Connect the front left
Connect the front right
Connect 2#
brake pipe
Connect the back
of main cylinder
Connect 2#
brake pipe