Geely FC Workshop Manual page 364

(f) Disassemble the clamp, then disconnect exterior cover of
rear row backrest with gasket.
10. Disassemble exterior cover of rear row chair
cushion.
Disassemble the clamp, then disconnect exterior cover of cush-
ion with gasket.
11. Assemble exterior cover of rear row chair cushion.
Use new clamp to assemble exterior cover of rear row chair
cushion in gasket.
Hint:
Do not damage or dirty exterior cover of cushion.
When assembling clamp, it is necessary to prevent exterior cover of cushion from crinkling.
12. Assemble exterior cover of rear row chair backrest (big).
Hint:
Do not damage or dirty exterior cover of cushion.
When assembling clamp, it is necessary to prevent exterior cover of cushion from crinkling.
13. Assemble exterior cover of rear row chair backrest (small).
Use new clamp to assemble exterior cover of rear row chair backrest in gasket.
Hint:
Do not damage or dirty exterior cover of cushion.
When assembling clamp, it is necessary to prevent exterior cover of cushion from crinkling.
14.Assemble rear backrest central hinge assembly.
Use two bolts to assemble central hinge assembly.
Torque: 20 N⋅ ⋅ ⋅ ⋅ ⋅ m
15. Assemble rear chair backrest side hinge assembly.
Use two bolts to assemble two side hinge assemblies.
16. Assemble rear row chair left backrest assembly [68010078]
Use the bolt to assemble left backrest assembly.
Torque: 8.0 N⋅ ⋅ ⋅ ⋅ ⋅ m
17. Assemble rear row chair right backrest assembly [68010079]
Use the bolt to assemble right backrest assembly.
Torque: 8.0 N⋅ ⋅ ⋅ ⋅ ⋅ m
18. Assemble rear row chair backrest assembly.
Use four bolts to assemble backrest assembly.
Torque: 18 N⋅ ⋅ ⋅ ⋅ ⋅ m
Chair--Rear chair (separating type)
Locking loop pliers
353