Geely FC Workshop Manual page 212

Table of Contents

Advertisement

(e) If there is any foam or emulsification phenomenon, it is necessary to exhaust air in power steering
system.
(f) Keep the engine at idling speed, and measure the oil
level of oil storage tank.
(g) Engine extinguishes.
(h) After waiting for several minutes, measure the oil level
of oil storage tank again.
Maximal increased height of oil level: 5mm
If finding any problem, it is necessary to exhaust
the air in power steering system.
(i) Check the oil level.
4. Check steering oil pressure.
(a) Disassemble oil pressure supply pipe from power steering gear. (referring to page 205)
(b) Connect special tool liking that shown in figure.
Note: when checking, the valve of special tool should be opened.
(c) Exhaust the air in power steering system.
(d) Start the engine, and keep it at idling speed.
(e) Turn steering wheel from left bottom to right bottom for several times to make oil temperature
Accessory
Oil pressure supply pipe
increase.
Oil temperature: 80°C
(f) Keep the engine at idling speed, and close the valve of
special tool, then observe the reading of special tool.
Minimal oil pressure: 6400kPa
Note:
The closing time of oil pressure meter valve could not
Power steering--Poser steering system
Power steering
gear
Accessory
¡Ü
¡Ü
¡Ü5mm
¡Ü
¡Ü
Special tool
In
Power
Close
steering
gear
Special tool
Out
Oil tank
Pump
201

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents