Geely FC Workshop Manual page 362

(b) Use new clamp to assemble chair gasket on chair gasket
bracket.
Hint:
Do not damage or dirty exterior cover of chair
gasket.
When assembling clamp, it is necessary to prevent
exterior cover of chair gasket from crinkling.
15. Assemble exterior cover of chair backrest .
(a) Use new clamp to assemble exterior cover of chair backrest
in chair gasket.
(b) Use new clamp to assemble chair backrest on chair
backrest bracket.
Hint:
Do not damage or dirty exterior cover of chair
backrest .
When assembling clamp, it is necessary to prevent
exterior cover of chair backrest from crinkling.
16. Assemble chair backrest assembly.
(a) Use four bolts to assemble chair backrest assembly.
Torque: 45 N⋅ ⋅ ⋅ ⋅ ⋅ m
(b) Over turn exterior cover of chair backrest to assemble clamp.
(c) Assemble the clamp.
17. Assemble left front safety belt locking assembly [68010040]
(a) Use the bolt to assemble left front safety belt locking assembly.
Torque: 42 N⋅ ⋅ ⋅ ⋅ ⋅ m
(b) Assemble fixing clasp.
18. Assemble driver chair assembly.
(a) Assemble driver chair.
Note: do not damage automobile body.
(b) Connect the joint.
(c) Assemble four bolts.
Torque: 47 N⋅ ⋅ ⋅ ⋅ ⋅ m
(d) Assemble right front lower trim board, right rear lower trim board and left lower trim board of driver chair.
Chair--Front chair
Locking loop pliers
Locking loop pliers
351