Handling - Geely FC Workshop Manual

(c) Install 2 nuts to lower end of absorber.
Torque: 153
Hint: coat oil on thread of nuts.
(d) Install brake hose and ABS speed sensor wire harness
bracket with bolts.
Torque: 19
9. Install front left stabilizer link assembly [64000097].
Install stabilizer link with nuts.
Torque: 74 5 N.m
Hint: if ball joint rotates with nuts, please fix bolts with
hexagonal wrench (6mm).
10. Install front wheels.
Torque: 103
11. Check and adjust front wheel alignment
(see Page 87).

Handling

1. Handle front left absorber assembly.
(a) Completely pull out absorber piston rod.
(b) As shown in the diagram, drill a small hole on cylinder body
between two lines with electric drill to make inside gas flow
out
Notes:
Iron chip may fly out during drilling, please be care-
ful in operating.
The gas is colorless, odorless and nontoxic.
Front suspension - Front shock absorber and helical spring
10 N.m
N.m
10 N.m
93