Geely FC Workshop Manual page 251

Special tools and measurers which any safety airbag repairing position should have:
Number
Name and type of tool
a 5S hexagon wrench
b
Socket wrench 18S
c 14S socket wrench
d
Numeric multi-meter DT 992 type
e
Electric detonator tester
Changeable subassembly which safety airbag repairing position should have:
a. Safety airbag assembly at the side of driver;
b. Safety airbag assembly at the side of passanger;
c. Helix cable assembly.
d. ECU assembly;
e. Steering wheel.
I. Safety airbag joint
Airbag controller
No.
(1)
(2)
(3)
(4)
(5)
(6)
1. All safety airbag joints should be yellow to be easy to distinguish the joints on other automobile parts,
this could guarantee the safety performance and reliability of safety airbag joint, each kind of joint has
special function and design.
240
Supplemental restraint system--Note
Assemble and disassemble ECU and safety airbag assembly
QJ992 type
Terminal dual-locking organization
Airbag anti-explosive organization
Checking organization of electric circuit connection
Inadequacy connection protection organization
Joint dual-locking organization
Joint dual-locking organization
Disassemble airbag subassembly on steering wheel
Assemble and disassemble big nut on steering column
at the side of passenger on automobile body.
Used for electric measurement on wiring harness
Used for resistance measurement of electric ignition device
of airbag subassembly.
Helix
cable
Short
wiring
harness
Item
Function
Safety airbag at
the side of driver
Safety airbag at the
side of passenger
Applicable
Joint 3, 4, 7, 8
Joint 4
Joint 2
Joint 6, 7, 10