Geely FC Workshop Manual page 367

(d) Check security function:
(1) When closing all doors, open the driver window to operate door control switch out of automobile.
(2) Take down the key, open driver door, then close the door and lock (not use key). In this situation
above, check that door could not open locker even if door control switch (handle operation) is
pressed to locker opening side out of automobile.
(3) Take down the key, close and use the key to lock driver door. In this situation above, check that
door could not open locker even if door control switch (handle operation) is pressed to locker
opening side out of automobile.
(4) Take down the key, close and use remote control key to lock driver door. In this situation above,
check that door could not open locker even if door control switch (handle operation) is pressed to
locker closing side out of automobile (only applicable for the automobile equipping with remote
control door locker control system).
Hint:
In following situation, check whether security has been canceled.
Ignition switch is turned to ON.
Use key operation to open the driver door locker.
After door locker is pressed to opening side by hand, door control switch (handle
operation) is pressed to locker opening side.
Use remote control locker control to open the door (only applicable for the automobile
equipping with remote control door locker control system).
2. Electric window main switch assembly
Operate door control switch by hand to check its conduction.
Position of switch
LOCK
UNLOCK
3. Check panel junction box assembly.
(a) Check 25A DOOR fuse.
(b) Check conformity relay.
(1) Disassemble F, G, H and I joint on instrument junction
box.
(2) Check the voltage and conduction of every terminal of
joint.
356
Anti-stealing and door lock--Electric door lock control system
Terminal connected by avometer
5-1 or 5-3
8-1 or 8-3
Regulated situation
Conduction
↑