Geely FC Workshop Manual page 129

(1) Put big fixing clamp on dustproof cover firmly.
(2) Put special tool on big fixing clamp.
(3) Lock special tool to tighten big fixing clamp.
Note: do not tighten special tool too much.
(4) Use special tool to adjust the clearance of big fixing
clamp.
Clearance: ≤ ≤ ≤ ≤ ≤ 0.8mm
25. Assemble fixing clamp of exterior joint dustproof
cover of left front drive shaft.
(a) AUMIGA fixing type.
Tighten small fixing clamp of exterior joint.
(1) Put small fixing clamp on dustproof cover firmly.
(2) Put special tool on small fixing clamp.
(6) Lock special tool to tighten small fixing clamp.
Note: do not tighten special tool too much.
(4) Use special tool to adjust the clearance of small fixing
clamp.
Clearance: ≤ ≤ ≤ ≤ ≤ 0.8mm
26. Assemble dynamic absorber of driveshaft (right
drive shaft).
(a) A type and C type
Liking that shown above, set up the distance of absorber:
A type and C type
118
Drive shaft--Front drive shaft
440 ± 2mm
Special
tool
Special
tool
Special
tool