Section 3 Rear Wheel Alignment - Geely CK Series 2007 Workshop Manual

No. 2 Transverse
Arm Assembly
Inspection
1. Inspect tire
Standard inflation pressure: 220 Kpa
2. Inspect rear wheel toe-in
Toe-in
If the rear wheel toe-in is not within the specification, adjust it via rear
wheel toe-in adjusting cam.
3. Inspect the camber
C a m be r
Notice: If the camber is not within the specification, check the suspension parts for damage/low
performance. Replace it if necessary.
118
No. 2 Transverse Arm Assembly
Rear Wheel Toe-In
Adjusting Plate
Rear Wheel Toe-In
Adjusting Panel
Rear Wheel Toe-In
Adjusting Cam
No. 1 Transverse
Arm Assembly

Section 3 Rear Wheel Alignment

C - D: 1 ～ 5 mm
- 20 ´± 3 0 ´
No. 1 Transverse
Arm Assembly
Rear Wheel Toe-In
Adjusting Cam
Body Bottom Plate
Front