Install The Lens - Christie cp2215 User Manual

Install the Lens

The lens seals the projection head, preventing contaminants from entering the main electronics
area. Do not operate the projector without a lens installed. Install a lens plug when you install or
transport the projector.
1. Move the lens clamp on the front of the projector to the open position.
2. Position the lens so the lens retaining ring mounts align with the lens mount.
3. Remove the lens caps from the front and rear of the lens.
4. Insert the lens straight into the lens mount opening without turning.
Magnets inside the lens mount help position the lens.
5. Insert and tighten the 2 lens mount hex screws shipped separately with the projector.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)
Downloaded from ProjectorsManual.com Manuals
Lens caps must be removed or they can melt and damage the lens.
Installation and Setup
7