Access the Projector and Run Diagnostics
Turn the Projector Off
1. On the Touch Panel Controller (TPC), tap and hold the light bulb
2. On the TPC, tap and hold the red power
The projector enters a cool down mode and the fans and electronics stay on for 10 minutes. After
this cool down period, the projector enters standby mode.
If you are servicing the projector, or removing the outer skins, disconnect the projector from AC
power and turn the breaker off.
34
Downloaded from ProjectorsManual.com Manuals
icon to turn the lamp off.
icon.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)