Table of Contents
Advertisement
Install the lens
Keep fingers and other body parts away from the moving parts in the projector. Motors and
fans may start without warning. Tie back long hair, remove jewelry and loose clothing before
manually adjusting the projector. Failure to comply could result in minor or moderate injury.
Failure to comply may result in equipment damage.
• The lens seals the projection head, preventing contaminants from entering the main
• Lens caps must be removed for operation or they can melt and damage the lens.
1. Unpack the zoom motor kit.
2. Use a flathead screwdriver to install the zoom motor mount onto the lens with a screw clamp
(A).
3. Remove the cover from the zoom motor mount with a #2 Phillips screwdriver.
Keep the hardware and cover.
CP42LH Installation Guide
020-101373-02 Rev. 1 (06-2015)
electronics area. Do not operate the projector without a lens installed. Attach a lens plug
when installing or transporting the projector.
A
Installation
41
Advertisement
Table of Contents
