Christie cp2215 User Manual page 2

NOTICES
COPYRIGHT AND TRADEMARKS
© 2013 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the product is
operated in a commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at the user's own expense.
CAN ICES-3 (A) / NMB-3 (A)
(A
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur
which may not be reflected in this document. Christie reserves the right to make changes to specifications at any time
without notice. Performance specifications are typical, but may vary depending on conditions beyond Christie's control such
as maintenance of the product in proper working conditions. Performance specifications are based on information available
at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to,
implied warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental
or consequential damages in connection with the performance or use of this material.
The product is designed and manufactured with high-quality materials and components that can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from
regular waste. Please dispose of the product appropriately and according to local regulations. In the European Union, there
are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we
live in!
Canadian manufacturing facility is ISO 9001 and 14001 certified.
GENERAL WARRANTY STATEMENTS
For complete information about Christie's limited warranty, please contact your Christie dealer. In addition to the other
limitations that may be specified in Christie's limited warranty, the warranty does not cover:
a. Problems or damage occurring during shipment, in either direction.
b. Projector lamps (See Christie's separate lamp program policy).
c. Problems or damage caused by use of a projector lamp beyond the recommended lamp life, or use of a lamp supplied
by a supplier other than Christie.
d. Problems or damage caused by combination of a Product with non-Christie equipment, such as distribution systems,
cameras, video tape recorders, etc., or use of a Product with any non-Christie interface device.
e. Problems or damage caused by the use of any lamp, replacement part or component purchased or obtained from an
unauthorized distributor of Christie lamps, replacement parts or components including, without limitation, any
distributor offering Christie lamps, replacement parts or components through the internet (confirmation of authorized
distributors may be obtained from Christie).
f. Problems or damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or other
natural disaster.
g. Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than Christie
service personnel or a Christie authorized repair service provider.
h. Problems or damage caused by use of a Product on a motion platform or other movable device where such Product has
not been designed, modified or approved by Christie for such use.
i. Problems or damage caused by use of a projector in the presence of an oil-based fog machine.
j. For LCD projectors, the warranty period specified applies only where the LCD projector is in "normal use." "Normal
use" means the LCD projector is not used more than 8 hours a day, 5 days a week. For any LCD projector where
"normal use" is exceeded, warranty coverage under this warranty terminates after 6000 hours of operation.
k. Image retention on LCD flat panels.
l. Failure due to normal wear and tear.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Please see the
Maintenance section for specific maintenance items as they relate to your product. Failure to perform maintenance as
required, and in accordance with the maintenance schedule specified by Christie, will void the warranty.
Downloaded from ProjectorsManual.com Manuals
)
.
,