Disable The Icp Signature Test; Indicate An Ld Is Installed - Christie cp2215 User Manual

Manage the DLP
3. Tap Download LD Certificate.
4. Tap Close.

Disable the ICP Signature Test

Error messages that appear when the ICP is turned on and the ICP signature test is run can disrupt
projector network monitoring. Use this procedure to disable the Signature Test.
1. Tap Menu > Diagnostics > DLP Management.
2. Tap Bypass Signature Test.
3. Tap Yes.
To re-enable the ICP signature test, clear the Bypass Signature Test check box.

Indicate an LD is Installed

1. Tap Menu > Administrator Setup > Content Devices Configuration.
2. Tap LD Installed.
36
Downloaded from ProjectorsManual.com Manuals
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)