Connect The Projector To A Computer; Connect Devices To The 3D Terminal; Connect Devices To The Gpio Port - Christie cp2215 User Manual

Item
N
O
P

Connect the Projector to a Computer

Connect one end of an Ethernet or a RS232 cable to the Ethernet or the RS232 PIB port on the
projector communications panel and the other end to your computer. To communicate with the
projector, the projector must be added to the same network as the computer. See
to a Network on page 16.

Connect Devices to the 3D Terminal

See View 3D Content

Connect Devices to the GPIO Port

The GPIO port is a 37-pin D-sub connector located on the PIB input panel. The port provides 8 input
and 7 output signals for connecting external devices to the projector. To configure the pins on the
connector, tap Menu > Administrator Setup > GPIO Setup.
Each available pairing of pins (±) is defined as an input or an output. Four inputs and three outputs
are predefined. If you want the projector to respond to an incoming signal, configure a pin as an
input. If you want an external device to respond to the projector as an output signal, configure a
pin as an output.
PIN
GPIN #1
GPIN #2
GPIN #3
GPIN #4
GPIN #5
GPIN #6
GPIN #7
GPIN #8
GPOUT #1
GPOUT #2
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)
Downloaded from ProjectorsManual.com Manuals
Connects the projector to external input and output devices, such as the Christie ACT.
Connects the projector to non-cinema video and graphics sources. These are single-link ports
for single-link cables and connectors. The connectors can be used together as a twin-link DVI
port.
Connects the projector to high-definition cinema sources. The connectors can be used
together to deliver Dual Link HD-SDI following the SMPTE 372M standard.
on page 65.
Positive
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Description
Negative
Pin 20 3-D L/R Input Reference
Pin 21 3-D L/R Display Reference
Pin 22 Reserved
Pin 23 Reserved
Pin 24 Input
Pin 25 Input
Pin 26 Input
Pin 27 Input
Pin 28 External 3-D L/R Output Reference
Pin 29 Reserved
Installation and Setup
Add the Projector
Description
12