Activate A Channel; Restore Default Channel Settings - Christie cp2215 User Manual

L/R Display Sequence
3D Sync Polarity
Dark Time
Output Delay
Phase Delay
7. Tap Activate to activate the channel.

Activate a Channel

1. Tap Menu > Channel Setup.
2. Select a channel in the Channel Name list.
3. Tap Activate.

Restore Default Channel Settings

1. Tap Menu > Channel Setup.
2. Select a channel in the Channel Name list.
3. Tap Defaults.
4. Tap Default Current Channel to restore the default settings to the selected channel.
- or -
Tap Default All Channels to restore the default settings to all channels.
5. Tap OK.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)
Downloaded from ProjectorsManual.com Manuals
Field
Defines the frame order (L-R or R-L) required for 3D perspective. This
option only has meaning when the Frame Rate factor M is equal to 2. For
this case, 2 input frames of data are required to constitute a complete
frame of image data. This parameter tells the system which frames go
together to make a complete image. NOTE: When using Line Interleave
as the 3D Sync Input Mode, ensure that Left (L1R1 L2R2) is selected.
Keeps 3D stereo sync output the same as input (true) or reversed
(inverted).
True: 3D L/R sync output from GPO will match L/R sync input.
Inverted: 3D L/R sync output from GPO will be the opposite of sync
input (left = right, right = left).
Creates a blank time interval between left and right frames to allow for
LCD shutter glasses, Z screen, or rotating 3D wheel to synchronize the
output. See Dark Time and Output Delay Notes below. Values between 0
and 65535 are accepted. Tap the Launch Dialog button
the dark time value.
The non-image time in Microseconds (μ). Offset 3D stereo sync output in
relation to dark time interval. Acceptable values are between -32768 and
32767. A positive offset adds a delay and a negative offset starts
playback early. Tap Launch Dialog to enter the output delay value.
The degree of reference between the left and right sync output. Values
between -180 and 180 are accepted. Tap Launch Dialog to enter the
phase delay value.
Work with Channels
Description
to enter
39