Nortel BCM50 Installation And Maintenance Manual page 87

Figure 34 Attach the BCM50 unit to the wallmount bracket
4 Press the unit against the wallmount bracket and slide the unit down until it clicks in place.
5
Slide the wallmount lock to the left (lock position). See
Figure 35 Wallmount lock in lock position
6 Use the supplied screw to secure the wallmount lock in position.
7
Repeat steps 1 to 6 for each additional BCM50 unit you are installing.
8 Install the BCM50 power supply using a method appropriate for your environment.
The power supply must be within 1.5 m (5 feet) of the BCM50 unit and within 1.5 m
(5 feet) of the ac power outlet (wall outlet or UPS).
Chapter 7 Installing the main unit
Figure 35.
BCM50 Installation and Maintenance Guide
87