Installing Ip Phones; Installing T7406 Cordless Systems - Nortel BCM50 Installation And Maintenance Manual

Installing IP Phones

The BCM50 system supports IP Phones 2001, 2002, and 2004, and the IP Softphone 2050.
The system can be set to automatically assign DNs to the IP Phones. The auto-assign feature
assigns DNs starting at 353 to 322.
If you choose to manually assign DNs, choose DNs from 322 to 353 if possible (Ensure that the
DN type in each DN record is set to IP telephony).
For details about configuring DN records for the IP telephones, refer to the IP Telephone
Installation and Configuration Guide.

Installing T7406 cordless systems

The T7406 cordless system consists of a base station that connects up to three digital station ports
on the BCM50 system, providing a radio interface for three cordless handsets. The cordless
handsets register to the base station, which transfers the call over the telephone lines connected to
the system. The handsets are configured to emulate the T7316/M7310 telephone features. This
system is most suited to small to medium office environments set up in an open fashion.
T7406 cordless telephones use the DNs for the ports on the station module that is connected to the
base station. They are digital sets and use M7310/T7316 as an operational model.
Chapter 10 Installing telephones and peripherals
BCM50 Installation and Maintenance Guide
115