Chapter 17
Connecting the BCM50 system to the LAN and WAN
This section describes how to connect the LAN and WAN cables to the BCM50 system.
Figure 58
shows the steps required to connect the data networking cables to the BCM50 system.
Figure 58 Overview of connecting data networking cables to the BCM50 system
Refer to the following sections for information on connecting the cables to the BCM50 system:
•
"Connecting the BCM50 system to the LAN" on page 154
•
"Connecting the BCM50 system to the WAN" on page 156
Chapter 17 Connecting the BCM50 system to the LAN and WAN
BCM50 Installation and Maintenance Guide
153