Nortel BCM50 Installation And Maintenance Manual page 55

Chapter 2 Introducing the BCM50 hardware 55
The following telephones and devices can be used with the BCM50 system:
Digital Phone 7100 — one-line display, one memory button
without indicator.
Digital Phone 7000 (not shown) (International only) — four
memory buttons, without display or indicators.
Digital Phone 7208 — one-line display, eight memory buttons
with indicators.
Digital Phone 7316 — two-line display, three display
buttons, 16 memory buttons with indicators, eight
memory buttons without indicators. Supports separate
mute key and a headset key under the dial pad.
Digital Phone 7316E — two-line display, three display
buttons, 16 memory buttons with indicators, eight
memory buttons without indicators. Handsfree, mute,
and headset buttons are located under the dial pad. The
default button assignment for the 7316E is different than
the 7316.
Digital Phone 7316E + Key Indicator Module
(KIM) — all the features of the 7316E plus 24
extra memory buttons with indicators, per KIM.
Can be configured as an enhanced central
answering position (CAP) that supports line and
hunt group appearances (the eKIMs), or as an
ordinary CAP that only supports memory button
programming (the OKIMs). Supports a maximum
of four eKIMs and up to nine OKIMS.
BCM50 Installation and Maintenance Guide