System Defaults - Nortel BCM50 Installation And Maintenance Manual

System defaults

Table 58 compares the system defaults for the North American, Global and UK regions. In
addition, the following functionality applies:
• Regions for Denmark, Holland and Sweden are the same as the Global region except for the
default to local languages and local tones and cadences.
• The Region for the Caribbean is the same as the North American region except that it supports
the M7000 telephone.
• The Region for CALA is the same as the Caribbean region, except NI ISDN is replaced by
ETSI ISDN (u-law).
Table 58 Region defaults (Sheet 1 of 2)
Functionality
Direct Dial Access code
DTMF parameters
Conference tone
PCM Companding Law
OLI digits
Dial Tone Detection
Hunt Groups
Target line if busy setting
M7000 set
Fax switch
Service Schedule time
Call Forward Delay
Attribute North American
0
Tone duration 120 msec
Pause time 1.5
Interdigit time 80 msec
disabled
mu-law
variable length
digits:minimum=
DN length,
maximum=10
enabled
Default delay 4 ring cycles
Queue timeout 60 sec
If busy busy tone
Mode broadcast
prime
disabled
enabled
Night start 23:00
end 07:00
Evening start 17:00
end 23:00
Lunch start 12:00
end 13:00
Service 4 start 00:00
end 00:00
Service 5 start 00:00
end 00:00
Service 6 start 00:00
end 00:00
Default disabled
Appendix K System region attributes
Global
0
120 msec
1.5
80 msec
disabled
a-law EBI
variable length to
a maximum of 15
digits
enabled
4 ring cycles
60 sec
busy tone
broadcast
prime
enabled
enabled
start 23:00
end 07:00
start 17:00
end 23:00
start 12:00
end 13:00
start 00:00
end 00:00
start 00:00
end 00:00
start 00:00
end 00:00
disabled
BCM50 Installation and Maintenance Guide
235
United Kingdom
0
120 msec
3.5
100 msec
enabled
a-law EBI
variable length to a
maximum of 15
digits
enabled
4 ring cycles
60 sec
busy tone
sequential
busy tone
enabled
enabled
start 23:00
end 07:00
start 17:00
end 23:00
start 12:00
end 13:00
start 00:00
end 00:00
start 00:00
end 00:00
start 00:00
end 00:00
disabled