To Configure Snmp Settings; To Configure Snmp Community Strings - Nortel BCM50 Installation And Maintenance Manual

140 Chapter 14 Using Element Manager to set the basic parameters
5
You can configure other attributes on the IP Terminal Global Settings tab depending on the
requirements for your system.

To configure SNMP settings

1 From the Configuration tab, click the Administrator Access folder to expand it.
2
Select SNMP from the Administrator Access folder.
3 Select the General tab. It is normally selected by default.
4 Click Modify in the SNMP Settings area. The Modify SNMP Settings dialog box opens.
5
Configure the attributes for Modify SNMP Settings. (see
Table 28 Modify SNMP Settings attributes
Attribute
Enable SNMP Agent
Minimum Required Security Select the minimum required security for SNMP.
SNMP Version Support
6 Click Ok.

To configure SNMP community strings

1 From the Configuration tab, click the Administrator Access folder to expand it.
2 Select SNMP from the Administrator Access folder.
3
Select the Community Strings tab.
4 Click Add.... The Add Community String dialog box opens.
N0027152 01 N0027152 01
Tip: To automatically configure IP Phones with DNs assigned:
1) Set enable registration to ON.
2) Set global registration password to ON.
3) Leave global password field blank.
4) Set auto-assign DN to ON.
Once the IP Phones are operational, set enable registration to OFF.
Description
Select whether to enable or disable the SNMP agent by clicking the check
box.
Select the SMNP version support from the dropdown list.
Table 28)