To Enter A Name For Your System; Configuring The Startup Parameters - Nortel BCM50 Installation And Maintenance Manual

4 Configure the attributes on the Quick Install Wizard form (see
Table 24 Quick Install Wizard attributes
Attribute
Attendant DN
Primary UI Style
Primary Language
From Line
To Line
Number of rings
5 Click Install.

Configuring the startup parameters

Use the following procedures to configure the startup parameters for the BCM50 using Element
Manager:
•

"To enter a name for your system"

• "To configure the date and time settings" on page 138
• "To configure DHCP server settings" on page 138
• "To configure IP Phones" on page 139
• "To configure SNMP settings" on page 140
• "To configure SNMP community strings" on page 140
• "To configure the SNMP manager list" on page 141
• "To create user accounts" on page 141
To enter a name for your system
1
From the Configuration tab, click the System folder to expand it.
2
Select Identification from the System folder.
3 Enter a name for your system in the System name field.
Chapter 14 Using Element Manager to set the basic parameters
Description
Enter the extension number of the attendant or operator assigned to CallPilot.
Select the mailbox user interface used as a default for the mailboxes.
If you select NVM, the mailbox user interface uses Norstar voice mail voice and text
prompts.
If you select CallPilot, the mailbox user interface uses CallPilot voice and text
prompts.
Select the language used as the primary language for the mailboxes.
Enter the line number of the first line in the range of lines you want CallPilot to
answer. CallPilot answers the range of lines between this line and the line you
enter in the To Line box.
Enter the line number of the last line in the range of lines you want CallPilot to
answer.
Enter the number of rings you want CallPilot to wait before answering lines.
Table 24).
BCM50 Installation and Maintenance Guide
137