To Configure The Mbm(S); Configuring The Media Bay Module - Nortel BCM50 Installation And Maintenance Manual

150 Chapter 16 Completing the initial installation (optional)
After the basic configuration is completed, you can further customize your system by using the
following configuration options:
•

"Configuring the media bay module"

• "Configuring modem settings" on page 151
• "Checking for software updates" on page 151
• "Configuring voice mail" on page 151
• "Customizing security policies" on page 152
• "Performing a backup" on page 152
Configuring the media bay module
For information on installing a media bay module (MBM) and setting the dip switches, refer to
"Installing a media bay module in an expansion unit" on page
You can also refer to
the cables between the main unit and expansion unit(s).

To configure the MBM(s)

1 Open Element Manager and connect to your BCM50 system.
2 From the Configuration tab, click the Resources folder to expand it.
3 Select Telephony Resources from the Resources folder (see
Figure 57 Telephony Resources page
4
From the Modules section, select the expansion unit that you want to configure.
N0027152 01 N0027152 01
"Connecting the expansion unit" on page 98
95.
for more details on connecting
Figure 57).