Using Element Manager To Set The Basic Parameters - Nortel BCM50 Installation And Maintenance Manual

Chapter 14

Using Element Manager to set the basic parameters

The Element Manager application provides a computer-based client interface that can connect to
devices over an IP network and display the programming interface for that device.
Through Element Manager, you can configure all of the basic parameters, which include:
• "Configuring the initial parameters" on page 135
• "Configuring the startup parameters" on page 137
Refer to the BCM50 Administration Guide (N0016868) for more information on how to use
Element Manager.
Figure 54 shows an overview of using Element Manager to set the basic parameters.
Figure 54 Overview of using Element Manager
Chapter 14 Using Element Manager to set the basic parameters
BCM50 Installation and Maintenance Guide
133