To Configure Ip Phones - Nortel BCM50 Installation And Maintenance Manual

4 Configure the DHCP server attributes (see
Table 26 DHCP server: general settings attributes
Attribute
DHCP server is
IP domain name
Primary DNS
Secondary DNS
Default gateway

To configure IP Phones

1 From the Configuration tab, click the Resources folder to expand it.
2
Select Telephony Resources from the Resources folder.
3
Select IP & Application Sets from the Module type column.
The Details for Module opens in the lower pane with the IP Terminal Global Settings tab s as
the default.
4
Configure the IP Terminal Global Settings attributes. (see
Table 27 IP Terminal Global Settings attributes
Attribute
Enable registration
Enable global registration
password
Global password
Auto-assign DNs
Advertisement logo
Chapter 14 Using Element Manager to set the basic parameters
Table
Description
Determines whether the DHCP server is disabled or enabled. If you want to
enable the DHCP server, you have the following options:
• Enabled - Automatic
• Enabled - IP Phones Only
• Enabled - All Devices
Note: On a BCM50a or BCM50e main unit, this field is disabled, since the
integrated router functions as the DHCP server.
The domain name of the network.
The IP address of the primary DNS to be used by DHCP clients.
The IP address of the secondary DNS to be used by DHCP clients.
The gateway through which DHCP clients connect to an external network.
Generally, this is the IP address of your network router.
Description
Set this value to ON to allow new IP clients to register with the system.
WARNING: Remember to set Registration to Off when you have finished
registering the new telephones.
If you want to require the installer to enter a password when IP telephones are
configured and registered to the system, check this box.
If this box is not checked (disabled) a valid Telset user ID and password is
required to register IP phones.
If the Enable Global Registration Password checkbox is selected, enter the
password the installer enters on the IP telephone to connect to the system.
If this field is left blank, no password prompt occurs during registration.
If set to ON, the system assigns an available DN as an IP terminal requests
registration. It does not prompt the installer to enter a set DN.
If set to OFF, the installer receives a prompt to enter the assigned DN during
the programming session.
Any information in this field appears on the display of all IP telephones. For
example, your company name or slogan (24 characters in length).
26).
Table 27)
BCM50 Installation and Maintenance Guide
139