Removing An Internal Component - Nortel BCM50 Installation And Maintenance Manual

194 Chapter 24 Replacing an internal component
Figure 72 Remove the top of the case
6 Lift the top of the case off of the BCM50 unit.
7 Continue with the next step,

Removing an internal component

Use one of the following procedures to remove the component:
• "To remove the hard disk" on page 195
• "To remove the fan" on page 196
• "To remove the router card" on page 197
Warning: Protect the hardware components against damage from electrostatic
discharge. Always wear a ground wriststrap before you handle components. Always
place the components in static-free container.
N0027152 01 N0027152 01
"Removing an internal component".