To Download And Install Element Manager; To Connect To The Bcm50 System; Accessing The Bcm50 System - Nortel BCM50 Installation And Maintenance Manual

134 Chapter 14 Using Element Manager to set the basic parameters

Accessing the BCM50 system

Use the following procedures to access the BCM50 system through the OAM port.

To download and install Element Manager

1 Connect one end of the Ethernet cable to the OAM port on the main unit, and connect the other
end to the Ethernet port on your computer.
The DHCP-enabled computer is assigned IP address 10.10.11.2. (255.255.255.252).
2 Open a web browser and enter the IP address 10.10.11.1 (BCM50 OAM port IP address).
The Enter Network Password dialog box opens.
3 Enter the following username and password:
Username: nnadmin
Password: PlsChgMe!
4 Click Ok.
The Welcome to BCM50 web page opens.
5
From the Welcome to BCM50 web page, click Administrator Applications.
The Administrator Applications page opens.
6 From the Administrator Applications page, click BCM50 Element Manager.
The Element Manager panel opens.
7
Click Download Element Manager on the right side of the screen.
8 When BCM50 Element Manager has finished downloading, double-click the application and
follow the instructions to install.

To connect to the BCM50 system

1
Open Element Manager.
2 From the Network menu, select New Network Element, then select Business
Communications Manager.
3 Enter the IP address, 10.10.11.1 in the dialog box.
4 Click Ok.
5 Select the address 10.10.11.1 from the Network Elements folder.
6
Enter the following username and password:
Username: nnadmin
Password: PlsChgMe!
7
Click Connect.
You are now connected to the BCM50 system.
N0027152 01 N0027152 01