Managing Calls And Videoconferences; Blocking Video From The Scopia Xt Series; Managing The Audio - RADVision SCOPIA XT4000 Series User Manual

7

Managing Calls and Videoconferences

This chapter details the configurations you can make on your SCOPIA XT Series to control the
way the video is displayed, to control the audio output and input, encryption support and
managing contacts.

Blocking Video From the SCOPIA XT Series

While in a call, you can block video from your local SCOPIA XT Series. Press
Remote Control Unit. The system sends a pre-defined image to the remote endpoint. The
icon appears on your display, indicating that the remote endpoint no longer receives video
from your local endpoint.
You can configure your SCOPIA XT Series to block video input from your local endpoint by
default at the start of each call. For more information see
on page

Managing the Audio

You can change the volume of calls, call ringing, and the volume of the microphone pod.
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.1
•
Blocking Video From the SCOPIA XT Series .............................................. page 59
•
Managing the Audio ........................................................................ page 59
•
Blocking Incoming Calls .................................................................... page 61
27.
•
Adjusting the System or Ringing Volume ................................................ page 60
•
Muting the Microphone Pod ............................................................... page 60
on the XT
"Blocking Video Input by Default"
Managing Calls and Videoconferences | 59