Searching For A Contact In The Phone Book - RADVision SCOPIA XT4000 Series User Manual

Step 7
Note
Step 8

Searching for a Contact in the Phone Book

If you know the name of the contact you want to find in the phonebook, you can search using
the name or surname. If you are not sure what is the name of the contact you need to find,
you can display all contacts to review them.
Procedure
Step 1
Step 2
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.1
Figure 2-18
Enter the required information, as described in
You can also manually define the Type, Call Type, and Rate each time you place a
call, as described in
"Dialing a Number from the SCOPIA XT Series Web Interface" on page
Table 2-3 Entering advanced information for a contact
Field Name
Label
Number
Type
Call Type
Rate
Select Save.
Access the SCOPIA XT Series web interface.
Select the Make your call tab.
Entering contact dialing information
Table 2-3 on page
"Dialing a Number Directly from the Endpoint" on page 44
Description
Define the contact's label. The purpose of label is provide
a short description of the contact, for example: home,
office or virtual room.
Enter the number or alias.
Select the protocol from the list.
Select whether the call is Audio-Video or Audio-Only.
Select the default call rate from the field. SCOPIA XT
Series will always use this rate calling this contact.
20.
and
47.
Getting Started | 20