Sharing Content In The Local Conference Room - RADVision SCOPIA XT4000 Series User Manual

Step 2
Step 3
Note

Sharing Content in the Local Conference Room

You can share the content of your computer screen with other participants in the local
conference room when the SCOPIA XT Series is not in a call. This mode is called local
presentation. When in the local presentation mode, the XT Series:
Before you begin
You must setup your computer and the XT Codec Unit before starting the presentation:
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.1
Configure > General.
Select Auto from the Local presentation mode list.
In the XT Series web interface, select Save.
In the endpoint, your changes are automatically saved.
•
Does not automatically accept incoming calls.
•
When you have an incoming call, local presentation mode is suspended and you are asked
how to handle the call (accept/reject/do not disturb).
•
Verify that the SCOPIA XT Series is not in a call.
•
Configure your computer to the resolution and refresh rates supported by the system. See
"Selecting the Computer Display Resolution" on page 34
•
To hear the PC input locally and remotely, you need to route PC audio through the input
audio port:
Navigate to Administrator settings > I/O connections > Audio - Inputs > Analog audio >
Audio selection and select one of the following options:
Figure 4-6 General settings
for detailed information.
Preparing for a Video Call or Videoconference | 36