Adjusting The Image Position - RADVision SCOPIA XT4000 Series User Manual

Adjusting the Image Position

If your monitor does not center the image correctly, perform this procedure.
Before you begin
This procedure is performed as part of the Quick Setup Wizard, after
Name and Language" on page
Start the Quick Setup Wizard by selecting Configure > Quick Setup from the Main menu.
Note
This can be done from the endpoint itself only.
Procedure
Step 1
Step 2
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.1
Examine the image on the monitor to decide if you need to adjust the image position.
The triangles in the top left corner and bottom right corner must be fully visible so that the
white border of the triangle is fully visible on all sides.
If the image is centered correctly, skip this procedure and select Next.
Figure 2-10
Press 1 to align the top left corner.
10.
Examining the image position
"Setting the System
Getting Started | 12