Table of Contents
Advertisement
5. To adjust the image on your monitor, select Next and continue with
Adjusting the Image Position
About this task
If your monitor does not center the image correctly, perform this procedure. This can be done from the
endpoint itself only.
Before you begin
This procedure is performed as part of the Quick Setup Wizard, after
Language
Access the quick setup wizard from the endpoint, as described in
on page 30.
Procedure
1. Examine the image on the monitor to decide if you need to adjust the image position.
User Guide for Scopia XT Executive Version 3.2
• Room endpoint: Select if the Scopia XT Executive is shared between multiple users.
Any user can connect their laptop.
Authentication for the Scopia XT Control utility is required each time you connect a
computer to the Scopia XT Executive.
Position
on page 33.
If performing the quick setup from the web interface, access the quick setup from the
endpoint to adjust the image. This can be done at any time.
on page 31.
The triangles in the top left corner and bottom right corner must be fully visible so that the
white border of the triangle is fully visible on all sides.
If the image is centered correctly, skip this procedure and select Next.
Adjusting the Image
Setting the System Name and
Accessing the Quick Setup Procedure
Getting Started | 33
Advertisement
Table of Contents
