Adjusting The Image Position - RADVision SCOPIA XT4000 Series User Manual

Step 3
Step 4

Adjusting the Image Position

If your monitor does not center the image correctly, perform this procedure.
Before you begin
This procedure is performed as part of the basic configuration after
and Language-related Settings" on page
Procedure
Step 1
Step 2
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
If you want to change the language of the system menus, select the required language from
the the Language list and press
language and press .
Select Next to continue the basic configuration.
Examine the image on the monitor to decide if you need to adjust the image position.
Triangles in the top left corner and bottom right corner must be fully visible.
If the image is centered correctly, skip this procedure and select Next.
Figure 3-3
Press 1 to align the top left corner.
. The list of languages is displayed. Scroll to the preferred
10.
Examining the image position
"Setting the System Name
Getting Started | 11