Configuring Scaiprof - Nortel DMS/MSL-100 Installation Manual

April 2004

Configuring SCAIPROF

Introduction
Table SCAIPROF defines the types of information sent by the switch to
Symposium Call Center Server.
Note: If you edit the parameters in table SCAIPROF, you must restart
Symposium Call Center Server for the changes to take effect.
To update table SCAIPROF
1 Edit the SCAIPROF table by typing table SCAIPROF and pressing Enter.
Result: The > prompt appears.
2 Type add and press Enter.
Result: The utility prompts for the LINKSET.
3 Enter the linkset name from table SCAICOMS.
Result: The utility prompts for the SRVCID.
4 Enter the Service ID. For more information, see "Service ID" on page 85.
Symposium and DMS/MSL-100 Switch Guide
Configuring the switch
49