Step 4: Connect Your M10 To The Network; Step 5: Check That The Connection Works; Lan Interconnection (Basic Ethernet Bridge) - Nokia M10 User Manual

DRAFT
Nokia M10 User's Manual

Step 4: Connect your M10 to the network

Connect the ADSL cable to the telephone socket and the Ethernet
interface to your PC. The green LAN LNK indicator lights up when
you connect the Ethernet cable. After a while the DSL light starts
blinking indicating that the connection is being established. The green
DSL light indicates that the unit has a connection to the central office.

Step 5: Check that the connection works

Ping the company server or the gateway to check that the connection
works.
4.3

LAN interconnection (Basic Ethernet bridge)

In this application example Nokia M10 connects transparently to a
remote office or company headquarters.
PC
Hub
Figure 4-4
4-14
RFC 1483
Ethernet
over ATM
Nokia
ADSL ATM
M10/bridge
Headquarters
LAN
LAN interconnection
Copyright Nokia Telecommunications Oy
Virtual ATM channel
connected from DSLAM
to HQ access bridge
ATM
network
DSLAM
Headquarters
access bridge
NTC C33539002SE_A0