Nokia M10 User Manual page 102

Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
NTC C33539002SE_A0
Enable/disable TCP/IP services
Enables/disables TCP/IP services in the Nokia M10.
You must enable TCP/IP services before you can enter
other TCP/IP settings for the M10. If you turn off TCP/
IP services and save the new configuration, the M10
clears its TCP/IP settings.
set ip option [on|off]
The argument enables/disables TCP/IP
m10> set ip option on
Enable/disable Ethernet port
Enables/disables communications through the Ethernet
port in the Nokia M10. You must enable TCP/IP func-
tions for an Ethernet port before you can configure its
network settings.
set ip ethernet option [on|off]
The argument enables/disables Ethernet port.
m10> set ip ethernet option on
Set Ethernet port IP address
Assigns an IP address to the Ethernet port. The IP ad-
dress you assign to an Ethernet port must be unique on
your network.
set ip ethernet address [ip_address]
The ip_address argument is the IP address, in dotted
decimal notation
m10> set ip ethernet address
191.212.11.11
Copyright Nokia Telecommunications Oy
DRAFT
Management
5-53