Ending A Cli Session; Using The Cli Help Facility; Saving Settings; The Root Command Hierarchy - Nokia M10 User Manual

DRAFT
Nokia M10 User's Manual

Ending a CLI session

You end a command line interface session by typing
mode. Entering
Root mode.

Using the CLI help facility

The help command lets you display on-line help for Root and Config
commands. To display a list of the commands available to you from
your current location in the command line interface hierarchy, type
. To display help related to a particular command type the
help
command followed by a question mark, e.g.

Saving settings

The command saves the working copy of the settings to restart
save
values. You can save the changes you have entered for a specific
function or for all functions in the Nokia M10. The Nokia M10
automatically validates its settings when you save and displays a
warning message if the configuration is not correct.

5.2.2 The Root command hierarchy

You begin in Root mode when you start a CLI session. The Root mode
lets you monitor the performance of your M10, display and reset M10
statistics, and issue administrative commands to restart M10
functions.

Root prompt

When you are in Root mode, the CLI prompt is the name of the M10
followed by a right angle bracket (>). For example, if you open a
command line interface to the M10 named "Kilo" you would see
as your CLI prompt.
Kilo>

Root command shortcuts

You can truncate most commands in the command line interface to
their shortest unique string. For example, you can use the truncated
command
q
line interface. However, you would need to enter
command, since the first characters of
command.
restart
5-24
in the Config mode switches the session into the
quit
in place of the full
Copyright Nokia Telecommunications Oy
show ?
command to exit the command
quit
rese
are common to the
reset
NTC C33539002SE_A0
in the Root
quit
.
for the reset