Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
NTC C33539002SE_A0
Enable bridging on channels using PPP over ATM
encapsulation
Enables/disables bridging services for the Nokia M10
ATM channel using ppp-vcmux encapsulation.
set bridge wan {vccx} option [on|off]
The first argument identifies the ATM channel (vccx, x
= 1 ... 8) and the second argument enables/disables
bridging on that channel. If there is only one ATM chan-
nel using ppp-vcmux encapsulation you can leave the
argument vccx out.
m10> set bridge wan vcc2 option off
Enable bridging on channels using bridged encap-
sulations
Enables/disables bridging services for a Nokia M10
ATM channel using ether-llc or ether-vcmux encapsula-
tion.
set bridge dsl {vccx} option [on|off]
The first argument identifies the ATM channel (vccx, x
= 1 ... 8) and the second argument enables/disables
bridging on that channel. If there is only one ATM chan-
nel using either one of these encapsulations you can
leave the argument vccx out.
m10> set bridge dsl vcc2 option off
Enable/disable bridging between ATM VCC chan-
nels
Enables/disables bridging between ATM VCC channels.
If only one VCC is used this option can be ignored.
set bridge interwan-bridging [on|off]
The argument enables/disables bridging between
VCCs
m10> set bridge interwan-bridging
[on|off]
Copyright Nokia Telecommunications Oy
DRAFT
Management
5-77