Nokia M10 User Manual page 123

DRAFT
Nokia M10 User's Manual
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
5-74
Enable/disable DHCP services
Enables/disables DHCP services in the Nokia M10. You
must enable DHCP services before you can enter other
DHCP settings for the Nokia M10. If you turn off DHCP
services and save the new configuration, the Nokia
M10 clears its DHCP settings. M10 can also relay
DHCP requests to another server
set dhcp option [off | server | relay-agent]
The argument disables DHCP (off), enables M10
DHCP server (server) or makes M10 act as a relay
agent (relay-agent)
m10> set dhcp option server
Specify start of DHCP address range
Specifies the first address in the DHCP address range.
set dhcp start-address [ip_address]
ip_address argument is the first IP address in the
DHCP address range.
m10> set dhcp start-address 192.168.1.1
Specify end of DHCP address range
Specifies the last address in the DHCP address range.
set dhcp end-address [ip_address]
ip_address argument is the last IP address in the
DHCP address range.
m10> set dhcp end-address 192.168.1.254
Set DHCP lease time
Sets the time how often the PC has to renew the DHCP
lease.
set dhcp lease-time [time]
time argument sets the lease time.
m10> set dhcp lease-time 00:01:00:00
Copyright Nokia Telecommunications Oy NTC C33539002SE_A0