Nokia M10 User Manual page 91

DRAFT
Nokia M10 User's Manual
You would have to enter two or more letters ("ppp") to move to the
PPP node, since its node name shares the first letter with the
preferences node.
Jumping down several nodes at once
You can jump down several levels in the Config hierarchy by
entering the complete path to a node.
M10 (top)>> ip ip-ppp
M10 (ip ip-ppp)>>
Moving up one node
You can move through the Config hierarchy one node at a time by
entering the command.
up
M10 (ip ip-ppp)>> up
M10 (ip)>>
Jumping to the top node
You can jump to the top level from anywhere in the Config
hierarchy by entering the command.
top
M10 (ip ip-ppp)>> top
M10 (top)>>
Moving from one subnode to another
You can move from one subnode to another by entering a partial
path that identifies how far back to climb.
M10 (ip ip-ppp)>> ppp module
M10 (ppp module)>>
Moving from any subnode to any other subnode
You can move from any subnode to any other subnode by entering
a partial path that starts with a top-level Config command.
M10 (ip ip-ppp)>> ip gateway
M10 (ip gateway)>>
5-42
Copyright Nokia Telecommunications Oy NTC C33539002SE_A0