Entering Atm Settings - Nokia M10 User Manual

DRAFT
Nokia M10 User's Manual
5. Save the configuration.
You must save the new configuration. Save command takes you to
the M10 home page.
6. Restart your M10.
You must restart your M10 by clicking Restart M10 for your
changes to take effect.
5.1.5 ATM page
ATM page is used to enable/disable ATM channels and select the
payload encapsulation method for the particular channel. After
enabling an ATM channel you can configure the channel in more detail
through the ATM-channel-specific Config buttons.
Figure 5-8

Entering ATM settings

1. Enable a channel by selecting the encapsulation from the option
menu. Up to eight ATM channels can be used.
5-12
ATM page
Copyright Nokia Telecommunications Oy NTC C33539002SE_A0