DRAFT
Nokia M10 User's Manual
DMT (ADSL) setting
This setting is used to define the lowest level format in which the data
is transmitted through the ADSL line. As default the data is transmitted
in ATM cells to interoperate with the Nokia Eksos B DSLAM.
Normally you do not have to change this value.
Command
Description
Syntax
Arguments
Example
5-78
Set data transmission mode over ADSL line
Specifies the mode used for data transmission over the
M10 ADSL line.
set dmt encap [hdlc | ppp | cell]
cell must be selected for ATM over ADSL applica-
tions. For frame based applications either hdlc (uses
simple HDLC framing on ADSL line) or ppp (uses point-
to-point protocol on the ADSL line) must be selected.
m10> set dmt encap cell
Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0