Nokia M10 User Manual page 137

DRAFT
Nokia M10 User's Manual
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
5-88
Set external protocol port number range for WAN
Sets the the external protocol port number range.
set pinhole item [entry_number] external-port-start
[port_number] external-port-end [port_number]
The entry_number argument defines the unique pin-
hole entry number. The sequential values starting from
0 are accepted. The port_number argument defines
the start and end of the external port range. Valid va-
lues are 0 – 65535.
m10> set pinhole item 1 external-port-
start 80 external-port-end 80
Set protocol
Configures the protocol.
set pinhole item [entry_number] protocol [protocol]
The entry_number argument defines the unique pin-
hole entry number. The sequential values starting from
0 are accepted. The protocol argument defines the
protocol. Protocols are TCP, UDP, ICMP, PPTP.
m10> set pinhole item 1 protocol tcp
Set server IP address in LAN
Configures the server IP address where the protocol
defined by the external port number is mapped in LAN
port.
set pinhole item [entry_number] internal-ip [ip_address]
The entry_number argument defines the unique pin-
hole entry number. The sequential values starting from
0 are accepted. The ip_address argument is the IP
address of the server.
m10> set pinhole item 1 internal-ip
192.168.1.80
Copyright Nokia Telecommunications Oy NTC C33539002SE_A0