DRAFT
Nokia M10 User's Manual
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
5-26
Send ARP request
Sends an Address resolution protocol request to match
the nnn.nnn.nnn.nnn IP address to an Ethernet hard-
ware address.
arp [nnn.nnn.nnn.nnn]
The argument is an IP string which consists of four
decimal numbers with values between 0 and 255 sep-
arated by dots.
M10> arp 192.221.11.11
Clear configuration settings
Clears the configuration settings of your M10. Issuing
the restart command after the clear command re-
stores the default configuration. clear command alone
clears the configuration and brings M10 into an unde-
fined state.
clear {yes}
If you do not use the optional yes argument CLI
prompts you to confirm the clear command.
M10> clear yes
Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0