Nokia M10 User Manual page 130

Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
NTC C33539002SE_A0
Set unacknowledged termination request maximum
Specifies the maximum number of unacknowledged
termination requests that your Nokia M10 will send be-
fore terminating the PPP link on the specified ATM
channel.
set ppp module {vccx} terminate-max [integer]
The first argument identifies the ATM channel (vccx, x =
1 ... 8). The integer argument can be any number
between 1 and 10.
m10> set ppp module vcc2 terminate-max 2
Set PPP timeout
Specifies the number of seconds the Nokia M10 must
wait for communication activity before terminating the
PPP link on the specified ATM channel.
set ppp module {vccx} timeout [integer]
The first argument identifies the ATM channel (vccx, x =
1 ... 8). The integer argument is the timeout in sec-
onds. If you enter value 0 the connection will never time
out.
m10> set ppp module vcc2 timeout 0
Enable/disable CHAP port authentication
Enables/disables CHAP authentication for a port on the
specified ATM channel. CHAP authentication must be
enabled before you can enter other CHAP information.
If CHAP is on it will be the first authentication method
offered to a remote peer during link negotiation.
set ppp module {vccx} port-authentication chap-option
[on|off]
The first argument identifies the ATM channel (vccx, x =
1 ... 8). The second argument enables/disables CHAP
port authentication.
m10> set ppp module vcc2 port-authentica-
tion chap-option on
Copyright Nokia Telecommunications Oy
DRAFT
Management
5-81