DRAFT
Nokia M10 User's Manual
5. Save the configuration.
You must save the new configuration. Save command takes you to
the M10 home page.
6. Restart your M10.
You must restart your M10 by clicking Restart M10 for your
changes to take effect.
5.1.8 Monitor page
You can get information about the status and statistics of the M10
through the Monitor page. The following links are available on the
Monitor page.
Overview
Memory
displays the Diagnostic log of M10.
Show
scrolls the Diagnostic log window back to the first message.
Reset
displays status information about the IP/PPP interfaces.
PPP
Ethernet
displays status information of the ATM channels.
ATM
Interfaces
Routes
displays the ARP cache table.
ARP
DHCP Server
DHCP Client
from the network.
displays the the status of the ADSL connection and statistics
DSL
about the connection.
displays the bridge table
Table
returns to home page.
Home
Figure 5-14
5-20
displays the basic identification information of M10.
displays the memory usage of M10.
displays status information of the Ethernet interface.
displays status information of the active interfaces.
displays the routing table.
displays the DHCP server lease table.
displays the IP address settings M10 has received
Monitor page
Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0