Nokia M10 User Manual page 111

DRAFT
Nokia M10 User's Manual
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
5-62
Enable/disable address mapping on channels
using IP over ATM or bridged encapsulations
Specifies whether you want the Nokia M10 to use
NAPT on the specified ATM link (vccx, x = 1 ... 8) using
ip-llc, ip-vcmux, ether-llc, or ether-vcmux encapsulation
when communicating with remote routers. Address
mapping lets you conceal details of your network from
remote routers. This is useful when connecting to an
Internet Service Provider.
set ip dsl {vccx} addr-mapping [on|off]
The first argument identifies the ATM channel (vccx, x =
1 ... 8). The second argument enables/disables ad-
dress mapping on that channel. If there is only one
ATM channel using one of these encapsulations you
can leave the argument vccx out.
m10> set ip dsl vcc2 addr-mapping off
Enable proxy address resolution server function on
channels using IP over ATM or bridged encapsula-
tions
Specifies whether you want the Nokia M10 to act as a
proxy address resolution server for your LAN for the IP
addresses behind the specified ATM link using ip-llc,
ip-vcmux, ether-llc, or ether-vcmux encapsulation.
set ip dsl {vccx} proxy-arp [on|off]
The first argument identifies the ATM channel (vccx, x
= 1 ... 8) . The second argument enables/disables the
proxy arp function. If there is only one ATM channel
using one of these encapsulations you can leave the
argument vccx out.
m10> set ip dsl vcc2 proxy-arp off
Copyright Nokia Telecommunications Oy NTC C33539002SE_A0