Sensor (Upper Media Exit) Removal; Upper Media Exit Pinch Roll Assembly Removal - Lexmark X850e Service Manual

Sensor (upper media exit) removal

1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the top cover. See
4.
Disconnect the connector from the sensor (upper media exit) (A).
5.
Release the hooks securing the sensor (upper media exit) (A) to the finisher.
6.
Remove the sensor (upper media exit) (A).

Upper media exit pinch roll assembly removal

1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the top cover. See
4.
Remove the four screws securing the four upper media exit pinch roll assemblies (A) to the finisher.
Rear
5.
Remove the four upper media exit pinch roll assembly (A).
"Rear upper cover removal" on page
"Top cover removal" on page
Rear
"Rear upper cover removal" on page
"Top cover removal" on page
A
4-101.
4-96.
A
Connector
Left
4-101.
4-96.
Left
7500-XXX
4-181
Repair information